Error TA0024 | Windows98 | Exception Errors |
Error Message "A fatal exception 0E has occurred at 0028:C16ED46E in module VXD APIX(01) The application will be terminated" When installing SanDisk ImageMate SDDR-31 drivers, system locks up, blue screen appears
When installing SanDisk's ImageMate drivers the system locks up and a blue screen appears with the message
" A fatal exception 0E has occurred at 0028:C16ED46E in module VXC APIX(01)...The application will be terminated"
A fatal exception 0E has occurred at 0028:C16ED46E in module VXD APIX(01)...The application will be terminated" (Or it immediately reboots)
Affects: SanDisk products: SDDR-31 and possibly others running Microsoft Windows 98 or higher
You probably have Adaptec(R) Easy CD Creator(TM) version 3.5, 4.0 or 4.1 installed on your system. This software probably came with your Iomega(R), HP(R), or other branded CD RW drive.
The Easy CD Creator program uses certain APIX.vxd functions that are also incorporated into Windows 98. This alone is not a problem. However, when CD Creator is installed, it renames Microsoft's APIX files. When these files are renamed, compatibility issues arise between CD Creator and other peripherals (such as ImageMate) that use the APIX functions. To rectify the problem, please follow the instructions below
For Easy CD creator 3.5 and earlier or Direct CD 2.5d:
Upgrade to 3.5c
Apply the floppy107.exe patch from ROXIO (see bottom of page)
You will find the update to 3.5c and the floppy107.exe towards the bottom of the page.
Once you have upgraded and run the patch, please restart the machine and then plug the ImageMate in, you should now be on-line.
For Easy CD creator 4.0 and 4.01:
Upgrade to 4.02
Then run the ren_apix.bat linked at the bottom of the page.
This file will replace the Adaptec/ROXIO version of the APIX.vxd , wnaspi32.dll and wnaspi32.adp with the Windows versions.
If you are still experiencing issues, right click on the file APIX.vxd on your system and make sure it says Microsoft on the version tab. If it does not you can extract the correct Microsoft version of each from the Win98 cd in the win98_53.cab
For Easy CD creator 4.03 and higher:
You just need to apply the Ren_apix.bat at the bottom of the page
If you have applied the patch and you have the correct version of the files, you may need to reload the driver. Right click on “my computer" go to properties and then device manager. At the bottom under Universal serial bus controllers you will see an entry for the ImageMate with a yellow exclamation next to it. Highlight the ImageMate entry and choose remove. Then choose refresh. It should now be properly loaded.
|You are at the www.techadvice.com site which is not associated with the company or products shown on this page.|
copyright www.techadvice.com All rights reserved